Chainsaw Repair

put in new fuel lines and new bits in the carb. Now runs well, we were whooping like school boys when it burst into life, and stayed running this afternoon. We have cut some wood, but needs a bit of tinkering for slow running etc.

Have a small problem with fuel pick up. I will start a new topic, because it will not only apply to the jonny red 111s.

Hi, does any one know if the 111s has an adjustable lubrication system? There is a screw above, and the other side of the spikes, that looks a reasonable suspect.

Some one out there must have a manual for the 111s???

cheers

Peter Davies

ps; as many of you out there have "handles", I should probably become "Shedro", on account of the hours I have spent in the shed the last few weeks, investigating the vital organs of chain saws!! Not a big change, as some of the family call me Pedro!

Yah it is a adjustable oiler 

Hi Sawdoctor,
I  guessthe bottom pair of screws, on the attached, retain the oil pump, the single screw above, retains the lubrication control valve, and the little black screw, at the top, adjusts the flow.
cheers
Peter Davies