Chainsaw Repair

        Has anyone here took a non-pro 026 and put a 026 pro adjustable oiler in its place?   Looks like there has to be a hole made on bottom of case to make it fit,  and to be able to adjust the output screw.  Anyone here done that successfully?  Thanks

I tried it once. The other problem is the adjustable oil pump clutch drum is thicker or taller then the non adjustable oil pump clutch drum. I think the non adjustable oil pumps work good.

Reason I'm asking is I have a 026 Pro that was smashed by a tree with a new OEM pump that was put in shortly before.  Now I'm building a non pro 026 with a bad pump and I just wanted to save myself 50-60 dollars.  Tried to make it work and noticed no access hole in bottom of case where the drum resides.  Must be a early 026 I guess.  Sounds like to me its going to be more trouble than its worth to convert it.  Only running a 16" bar/chain anyway and a Picco at that.  I'll just order the standard and be done with it.  I thank you all for your input.