« previous next »
Pages: [1]   Go Down

Author Topic: 056 Ignition Module  (Read 9211 times)

0 Members and 37 Guests are viewing this topic.

Offline

  • 3 cube
  • *
  • Posts: 10
  • Karma: 1
  • Location: Downeast

    • Total Badges: 9
    Badges: (View All)
    Karma Search Combination Level 2 Avatar Topic Starter
056 Ignition Module
« on: September 08, 2017, 09:05:32 am »
Back in May, I joined this forum because of a problem with my 056. I received a lot of help and then my schedule was upended and the saw was put on the back burner. Obviously, I'm back at it.

Here are the facts:

The Saw needs an Ignition Module
The Stihl Dealer gave me the following part number, 11084000800

Now I need to find a used one of these or someone with a new one. Going through the dealer would be an astronomical amount of money. I think they do this so one has to buy a new saw?

I also am wondering if any of you know where I can see a blow-up parts diagram or service manual so I can take it apart correctly.

Thanks once again for any help at all.

Bill
Logged

Share on Bluesky Share on Facebook

Offline

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24888
  • Karma: 665
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

    • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: 056 Ignition Module
« Reply #1 on: September 08, 2017, 10:57:23 am »
stihl 056 IPL sent to email.
Logged

Offline

  • 6 cube
  • ****
  • Posts: 205
  • Karma: 66
  • Location: Brampton, Ontario

    • Total Badges: 28
    Badges: (View All)
    Nineth year Anniversary Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary
Re: 056 Ignition Module
« Reply #2 on: September 09, 2017, 12:29:09 pm »
Quote from: Seldomseen on September 08, 2017, 09:05:32 am
Back in May, I joined this forum because of a problem with my 056. I received a lot of help and then my schedule was upended and the saw was put on the back burner. Obviously, I'm back at it.

Here are the facts:

The Saw needs an Ignition Module
The Stihl Dealer gave me the following part number, 11084000800

Now I need to find a used one of these or someone with a new one. Going through the dealer would be an astronomical amount of money. I think they do this so one has to buy a new saw?

I also am wondering if any of you know where I can see a blow-up parts diagram or service manual so I can take it apart correctly.

Thanks once again for any help at all.

Bill

I you would like to try a fix for the module a member on another site has it figured out.

The link to the actual fix is on page three starts with post #51. I think the capacitor is listed a bit earlier. Good stuff there and it doesn't look too tough.

SUCCESS!!! Just repaired Stihl 045/056 Bosch electronic ignition!!!!!
Just talked to a small shop owner about the 045&056. He knows a guy that has a few that doesn't run should I feel bad for buying these for little $$$$ ? If I can lol !! Yes--- you should...
Arborist, Chainsaw & Tree Work Forum · arboristsite.com
Logged
Tim

Offline

  • 3 cube
  • *
  • Posts: 10
  • Karma: 1
  • Location: Downeast

    • Total Badges: 9
    Badges: (View All)
    Karma Search Combination Level 2 Avatar Topic Starter
Re: 056 Ignition Module
« Reply #3 on: September 10, 2017, 04:00:20 pm »
Nice, thank you. I'll check it out
Logged

Online

  • 6 cube
  • ****
  • Posts: 227
  • Karma: 104
  • Retired Industrial Electrician
  • Location: Indiana

    • Total Badges: 22
    Badges: (View All)
    Eighth year Anniversary Level 5 Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary
Re: 056 Ignition Module
« Reply #4 on: November 09, 2017, 12:26:50 pm »
Quote from: Seldomseen on September 08, 2017, 09:05:32 am
Back in May, I joined this forum because of a problem with my 056. I received a lot of help and then my schedule was upended and the saw was put on the back burner. Obviously, I'm back at it.

Here are the facts:

The Saw needs an Ignition Module
The Stihl Dealer gave me the following part number, 11084000800

Now I need to find a used one of these or someone with a new one. Going through the dealer would be an astronomical amount of money. I think they do this so one has to buy a new saw?

I also am wondering if any of you know where I can see a blow-up parts diagram or service manual so I can take it apart correctly.

Thanks once again for any help at all.

Bill
Check your messages for a link to an 056 service manual.
Logged
Useful Useful x 1 View List

Offline

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181

    • Total Badges: 34
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 6 Seventh year Anniversary Sixth year Anniversary
Re: 056 Ignition Module
« Reply #5 on: November 11, 2017, 06:13:28 am »
I didn't look up the IPL but if it is the internal type that sets under the flywheel I think it's the same as a Husqvarna 2100 .At any rate there are several on flea bay but they aren't cheap .
Logged

Offline

  • 3 cube
  • *
  • Posts: 10
  • Karma: 1
  • Location: Downeast

    • Total Badges: 9
    Badges: (View All)
    Karma Search Combination Level 2 Avatar Topic Starter
Re: 056 Ignition Module
« Reply #6 on: November 13, 2017, 11:59:47 am »
I did download the manual and purchased the fuses for the ignition module hack. Time is just so rare where I can isolate myself (in a warm) environment and settle into this project. I need to be undisturbed and work S l o w l y. I will have to find again the YouTube Video or perhaps I added it to my YouTube site.

Thank you for the help.
Logged

Offline

  • 5 cube
  • ***
  • Posts: 129
  • Karma: 17
  • 40 years mechanical and 2-Stroke racing experience
  • Location: British Columbia, Canada

    • Total Badges: 17
    Badges: (View All)
    100 Posts Level 4 50 Posts Third year Anniversary Second year Anniversary Level 3
Re: 056 Ignition Module
« Reply #7 on: January 05, 2019, 05:07:42 pm »
I have seen people claim in the past that you can simply replace the electronic half of the Bosch module with a cheap $20 aftermarket module and they work,but I wonder for how long? We tried that in our shop in the mid 80's,my buddy hacksawed the electronic half off a dead one and installed a $7 Atom module,and it had spark and ran. We figured we were geniuses,we just fixed a $200 ignition with a $7 part.
So we fixed a few worksaws that way,but our glee did not last for long,they all failed soon and we had some pretty angry guys in our shop!It seems like the Bosch igntions have magnets all the way around the flywheel,unlike most which just have magnets on one spot on the flywheel,and this kills the little units quickly. Maybe some of the new units survive now,but I would not try that path again on someone else's saw.
Logged
Experience builds real horsepower...
When the hammer drops the BS stops:Loggers sports competition!
Pages: [1]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
19 Replies
6353 Views 		Last post January 31, 2012, 09:09:32 pm
by Al Smith
3 Replies
1652 Views 		Last post July 29, 2013, 06:15:02 pm
by sharkey
3 Replies
3024 Views 		Last post December 13, 2013, 05:00:34 pm
by brokenbudget
1 Replies
1477 Views 		Last post January 07, 2014, 11:28:23 pm
by jmester
8 Replies
1840 Views 		Last post April 29, 2015, 11:48:00 am
by 3000 FPS
2 Replies
992 Views 		Last post July 11, 2015, 07:07:14 am
by jmester
2 Replies
2035 Views 		Last post January 14, 2020, 09:07:19 pm
by Girbull
0 Replies
933 Views 		Last post December 02, 2017, 11:36:12 am
by copen
14 Replies
2183 Views 		Last post February 01, 2026, 09:19:45 pm
by jcsmith
2 Replies
1144 Views 		Last post July 02, 2022, 04:35:49 pm
by pleasant