Author Topic: Echo cs370 cylinder and piston set (Read 2215 times)

randy_das · « **on:** January 15, 2016, 12:52:37 am »

I just got my saw out for the first time this season and it was running about 3/4 throttle and then it died and now wont start. I pulled the plug and saw grey stuff on it and I knew it was a cylinder/ piston issue. I mixed the gas right because its the same gas I was using in my duplicate one and I haven't had any problems with it. I need to see what a cylinder, piston, rings and gaskets cost for it.

leec · « **Reply #1 on:** January 16, 2016, 10:43:06 am »

They are pricey and not much AM stuff around. Always worth a look on on Huztl (ebay) they do the odd Echo part.

mountainlake · « **Reply #2 on:** January 16, 2016, 11:28:18 am »

Online a new OEM piston is $42 and a new cylinder is $96. Most time you can get by with cleaning up the cylinder and I'd sure use a $42 OEM piston instead of a $25 aftermarket one. Steve

randy_das · « **Reply #3 on:** January 16, 2016, 06:20:20 pm »

whats the best places to get the piston, rings and gaskets?

mountainlake · « **Reply #4 on:** January 17, 2016, 06:18:43 am »

The price I gave was from SEPW Small engines parts warehouse, there are several online sites. The piston comes with rings , wrist pin, bearing and circlips. Steve

Chris-PA · « **Reply #5 on:** January 17, 2016, 09:05:24 am »

Are you sure you need a piston? Maybe you can get away with a clean up and just a new ring?

mountainlake · « **Reply #6 on:** January 17, 2016, 11:05:35 am »

If you can by with just a ring then you down to $5 or so. Steve

randy_das · « **Reply #7 on:** January 18, 2016, 12:54:40 pm »

im not sure it what it actually needs yet. I was trying to get a worst case scenario before I tore it down and didn't have the money to buy parts. all I now is is was only running about 3/4 throttle then it died. its not the gas mix because i have another saw exactly like it that im running that gas in and its fine. i got both out to use them for the first time this year and my cs4500 has no spark, one of my cs370s started after a few pulls and the other on i had the choke and use the primer bulb and it started but was kinda sluggish.

Subject / Started by	Replies	Last post
echo 8000 piston and cylinder pics - newest Started by sharkey « 1 2 » Echo	13 Replies 5904 Views	December 07, 2011, 05:32:23 pm by brokenbudget
echo cs370 throttle rod hook-up Started by Bob K IPL and Service Manuals	9 Replies 2708 Views	August 17, 2013, 10:06:56 pm by 660magnum
505 piston cylinder Started by doreadeal « 1 2 » Poulan	19 Replies 9165 Views	September 09, 2013, 09:51:10 pm by doreadeal
Stihl 084 piston/cylinder Started by adam32 Wanted	1 Replies 1863 Views	March 11, 2014, 04:13:31 pm by Cut4fun .
Stihl 046 piston and cylinder Started by jmester Trades Swap Section	0 Replies 1560 Views	March 04, 2015, 08:35:50 am by jmester
Husqvarna 372 piston and cylinder Started by jmester Locked Sale and Wanted threads	4 Replies 1265 Views	March 06, 2015, 11:28:35 am by jmester
Where to by a 576xp Piston and Cylinder OME Started by Jason K Husqvarna	4 Replies 1668 Views	March 10, 2015, 10:43:39 am by 660magnum
MS 260 Cylinder and piston. Started by 660magnum Stihl	0 Replies 1313 Views	September 26, 2015, 10:29:23 pm by 660magnum
cylinder / piston interchange Started by jcsmith « 1 2 » Poulan	12 Replies 8134 Views	January 12, 2016, 11:14:58 pm by 3000 FPS
echo cs370 Started by echo user Echo	8 Replies 1760 Views	April 16, 2017, 10:44:51 pm by echo user

Chainsaw Repair

News:

Author Topic: Echo cs370 cylinder and piston set (Read 2215 times)

randy_das

Echo cs370 cylinder and piston set

leec

Re: Echo cs370 cylinder and piston set

mountainlake

Re: Echo cs370 cylinder and piston set

randy_das

Re: Echo cs370 cylinder and piston set

mountainlake

Re: Echo cs370 cylinder and piston set

Chris-PA

Re: Echo cs370 cylinder and piston set

mountainlake

Re: Echo cs370 cylinder and piston set

randy_das

Re: Echo cs370 cylinder and piston set

Related Topics