Author Topic: How do you buck large rounds. (Read 2355 times)

3000 FPS · « **on:** April 07, 2014, 10:14:37 pm »

I was just wondering how some of you buck up large logs. I myself always cut from the top down and then switch sides and cut from the top down and put in a wedge to prevent pinching. I then roll the log so I then cut what was the bottom from the top also.

sharkey · « **Reply #1 on:** April 08, 2014, 12:07:21 am »

Of course this depends on bar length and size of log. Over the top and down to get the bottom far edge. Or, I bore in from the top and leave a holding piece to keep from getting pinched. Then come back over and cut the top piece once the bottom is cut.

3000 FPS · « **Reply #2 on:** April 08, 2014, 12:19:46 am »

Quote from: sharkey on April 08, 2014, 12:07:21 am

Of course this depends on bar length and size of log. Over the top and down to get the bottom far edge. Or, I bore in from the top and leave a holding piece to keep from getting pinched. Then come back over and cut the top piece once the bottom is cut.

Interesting idea, I have not heard of anyone using that technique before.

I was assuming in my endeavors that the log was larger across then the bar you had on hand. That is why I mentioned the cutting from both sides.

KilliansRedLeo · « **Reply #3 on:** April 08, 2014, 08:48:25 am »

I do the same Roger! Don't like messing with changing the bar for only a few cuts out of hundreds.

3000 FPS · « **Reply #4 on:** April 08, 2014, 09:33:27 am »

In my case the longest bar I have is 32" and a lot of the rounds I have cut were in excess of 40".

Cut4fun . · « **Reply #5 on:** April 08, 2014, 02:48:12 pm »

I used to quarter up large logs with 084 3120 for guys with 50cc saws and 20" bars. Then they bucked up the quartered sections.

Al Smith · « **Reply #6 on:** April 08, 2014, 08:56:00 pm »

Depends .I normally walk over the top and down .You have to watch how the log lays so you don't pinch it .

3000 FPS · « **Reply #7 on:** April 08, 2014, 09:00:28 pm »

Quote from: Al Smith on April 08, 2014, 08:56:00 pm

Depends .I normally walk over the top and down .You have to watch how the log lays so you don't pinch it .

Do you use wedges when doing big rounds Al?

SDB777 · « **Reply #8 on:** April 08, 2014, 09:48:16 pm »

I wish I could come across a log big enough to have to walk around it from the other side to finish the cut....but 50" or bigger is hard to find for me!

Scott (maybe I could use my little saw and try) B

mdavlee . · « **Reply #9 on:** April 09, 2014, 08:00:23 am »

Depending on how the log is laying I go across the top and then bring it back to me to finish the cut. I have had to walk around one log even with a 42". It was a little over 60".

Subject / Started by	Replies	Last post
Advice on large cc saw Started by super44 Wanted	4 Replies 1777 Views	July 05, 2012, 05:31:34 am by Al Smith
Husqvarna large mount 'orange lettered' nos bar! Started by KilliansRedLeo Wanted	0 Replies 612 Views	September 21, 2013, 12:54:45 pm by KilliansRedLeo
066 bench racing. trying to get large torque gain? (long). Started by 1manband « 1 2 3 4 5 » Stihl	41 Replies 9621 Views	February 17, 2014, 01:18:38 pm by Grande Dog
Large Frame McCulloch Bar Mounts. Started by Eccentric « 1 2 3 » McCulloch	20 Replies 5918 Views	September 07, 2016, 10:25:58 pm by Al Smith
064 jug, large clutch cover, 3/4 wrap wanted Started by gunnusmc03 Wanted	1 Replies 859 Views	February 18, 2014, 11:45:34 am by dozerdan
Large collection of Stihl manuals Started by HUSKY KEV IPL and Service Manuals	4 Replies 1943 Views	December 23, 2018, 10:24:07 am by DNX800
Seal puller large and small OEM Started by Cut4fun . Stickys of How to Basics commonly ask questions	2 Replies 1659 Views	January 31, 2023, 06:59:28 am by Cut4fun .

Chainsaw Repair

News:

Author Topic: How do you buck large rounds. (Read 2355 times)

3000 FPS

How do you buck large rounds.

sharkey

Re: How do you buck large rounds.

3000 FPS

Re: How do you buck large rounds.

KilliansRedLeo

Re: How do you buck large rounds.

3000 FPS

Re: How do you buck large rounds.

Cut4fun .

Re: How do you buck large rounds.

Al Smith

Re: How do you buck large rounds.

3000 FPS

Re: How do you buck large rounds.

SDB777

Re: How do you buck large rounds.

mdavlee .

Re: How do you buck large rounds.

Related Topics